Click a part number and download 3D model .

Internet Explorer 5.5 or higher is required to view this eDrawings file.

Clamp to the table edge and effortlessly move your optics on linear ball bearing shafts.The two parallel hardened stainless steel shafts provide excellent horizontal stability and stiffness.

The cross blocks have bronze bushings cast into them to provide a lubricious surface upon which the vertical post can slide.The vertical post is made of solid stainless steel. All stands include Old School's Quick release safety clamp. The horizontal arms are made of Thomson™ hardened stainless steel linear shafting and glide along Thomson™ linear ball bearings. The horizontal arm is designed to accept the industry standard 5/8" "Bonder Pin" dowel from the top, bottom or end on. If the microscope does not have a 5/8" dowel choose one of Old School's tilting or straight adapters. The horizontal arm may be rotated 360 degrees around the vertical post.

Data Sheet (pdf format)

Home • Microscope Stands • Speed Skating • Contact Us